Solar Water Heating System, 3 Panels, 300L Cylinder

This optimised system will provide you with your hot water for showers, baths and dishwashing for most of the year.

The C22-AR collector is Europe's most efficient flat plate collector. It has a special anti-reflective glass treatment which increases energy yield by upto 10%.

The CIRCO solar circulation unit manages the heat transfer from the solar collector to the hot water cylinder. This unit is in turn controlled by the SUNGO unit which modulates the pump to adapt to varying solar radiation. This system ensures optimal thermal output even during periods of low radiation.

The special hot water cylinder is carefully insulated, iIn this way, the heat stored in the hot water cylinder is preserved as well as possible.

System specifications

3 x C22-AR Black Anodised Panels. Area 6.6m² (6m² aperture)

300Litre vented or unvented cylinder

CIRCO Pumpstation with SUNGO S controller

Expansion Vessel with connecting pipework and mounting brackets

10litres of solar rated anti-freeze

To complete the system, you will also need the desired mounting kit, be it in-roof or on-roof.

PANEL DETAILS

 High Efficiency through Perfect Details

This flat panel has won numerous German awards for efficiency, quality and value for money. It came top when tested as a system by ISFH 2001 for a 4 person household in Wurzburg, Germany with a 300 litre cylinder and 5 square metres of panel. The output was recorded as an incredible 546kWh/m²a.

The panel has a highly selective flat plate absorber with a vacuum applied coating which minimises radiation losses and 60mm of back insulation with perfectly wrapped sides to minimise heat losses. The collector is fitted with sunarc anti-reflective safety glass which increases thermal yield by upto 10% as a result of its special nanostructure.

High Quality Materials

The frame is made from black anodised aluminium with weather resistant EPDM seals. The corner joints of the rubber seals are vulcanised. The copper absorber plate is ultra-sonically welded to the internal pipe arrangement.

 Excellent Price/Performance Ratio

The panels are tested according to the European norm EN 12975, the CE label and have repeatedly won awards from the Independent Institute for Consumer Good Testing in Germany "Stiftung Warentest".

 Simple and Fast installation

 Through the use of well developed and proven mounting kits, illustrated assembly instructions and solder-free connections, these panels are extremely easy to install.

Adaptable Arrangements and Installations

Another advantage of this excellent panel is that it can be mounted on-roof, in-roof, horizontally or vertically.

On-roof; Without the need to remove any part of the roof, the panels can be mounted either horizontally or vertically with rails on roof brackets.  The roof brackets are available in three different types depending on the type of roof covering. Up to four collectors can be connected in series. Short, well insulated flexible tubes make connection straightforward and allow for any expansion and contraction.

In-roof; Attractive in-roof installation is possible for roofs with a minimum pitch of 27 degrees and with any roof covering. The panels are installed with the connections to the top and the corrugated flashings can be joined without solder.

Free-standing; It is also possible for the panels to be installed in horizontal or vertical orientations on stands with adjustable pitches. Concrete slabs or gravel covered aluminium trays can be used as foundations.

COMPONENT WARRANTIES

Solar Collectors 10 YEARS

Solar Cylinder 25 YEARS

Other Components and Consumables 2 YEARS